This PIR MP. alert needs to insert SIM card to control. When people come close to this device, it will detect signal, alarm and send a call to the bound number. It has the function of audio monitoring and positioning. And it is suitable for use in home, office, hospital, storage, etc.
1. Insert SIM card into the device for controlling. (GSM SIM card is recommended)
2. Number binding: any number call in 15 seconds later will be connected automatically. Hearing voice answer from the phone means binding successful.
3. Put or paste the alarm in a certain height, within 5 meters within the angular range 120 degrees left and right, as long as people or animals, swaying back and forth in a very short time, induction starts.
4. Monitoring and Interception: -After turning on, it can be connected by communication tools. And waiting for a few seconds after getting through, you can hear clearly the situation 15 meters area around.
5. Remote Control Setting: – By sending 0000 with your mobile phone to the SIM card number, it can be shut down, sending 1111 will activate this sensing function.
Sensitivity: 5-8m/16-26ft (center angle: 90 degrees)
Standby current: below 0.05mA
Working current: below 10mA
Operating frequency: 850MHz, 900MHz, 1800MHz, 1900MHz
Standby Time: 5-7days (for body sensing); 15-20 days (not for body sensing)
Input Voltage: 100-240V AC 50-60HZ 150Ma
Output Voltage: 5V 500MA
Alarm size: 4.7 * 3.2 * 1.5cm/ 1.8 * 1.2 * 0.6in
Alarm weight: 25g/ 0.8oz
Package size: 12.7 * 10.6 * 3.4cm/ 5 * 4.1 * 1.3in
Package weight: 135g/ 0.3oz
1 * PIR MP. Alert
1 * Charging cable
1 * Power Adapter
1 * User manual
Infrared sensor alarm. When people get close to the alarm; it will detect the signal and activate the alarm. Audio monitoring, clear voice. After binding this device with your phone, it will call you when it alarms.
Adopts advanced wireless communication technology. The highest sensitivity in the range of 4-5 meters. Connectivity can listen to a location within 15 meters of the situation,the sound is very clear.
Positioning. You can send message “DW” to SIM card number, and if the alarm is moved, it can send you its new address to you.
Remote control. You can turn on or turn off its sensing function by sending message to its SIM card number.
Can protect your property well even without being interrupted and informed. Provide an effective anti-theft system to keep thieves away compared with others expensive devices.
Mengshen® A9 Mini Wireless PIR MP. GSM Alert with Infrared Inductive Probe Anti-theft Motion Detection Alarm System Audio Monitoring Positioning MS-A9
Introduction:This PIR MP. alert needs to insert SIM card to control. When people come close to this device, it will detect signal, alarm and send a call to the bound
Categorie: Allarmi, Fai da te, Sicurezza e protezione, Sistemi di sicurezza domestica.